Configuring Call Routes For Inbound Calls - HP FlexNetwork MSR Series Configuration Manual

Step
5. Match a source host
name prefix for the VoIP
voice entity.
6. Match a destination host
name prefix for the VoIP
voice entity.
7. Match a source address
for the VoIP voice entity.

Configuring call routes for inbound calls

Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program view.
4. Enter VoIP voice entity view.
5. Configure the called number
template for the VoIP voice
entity.
6. Configure the call route.
Enabling codec transparent transfer
If the SIP trunk device does not support the codec capability sets supported by the calling and called
parties, enable codec transparent transfer on the SIP trunk device. The SIP trunk device
transparently transfers codec capability sets between two parties. The calling and called parties
complete the codec negotiation.
To enable codec transparent transfer:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program view.
4. Enter VoIP voice entity view.
Command
match source host-prefix host-prefix
match destination host-prefix
host-prefix
match source address { ipv4 ip-address
| dns dns-name | server-group
group-index }
Command
system-view
voice-setup
dial-program
entity entity-number voip
match-template match-string
address sip { dns domain-name
[ port port-number ] | ip ip-address
[ port port-number ] | proxy }
Command
system-view
voice-setup
dial-program
entity entity-number voip
206
Remarks
Optional.
Not specified by default. In
other words, all source host
names can be matched.
Optional.
Not specified by default. In
other words, all destination
host names can be matched.
Optional.
Not specified by default. In
other words, all source
addresses can be matched.
Remarks
N/A
N/A
N/A
N/A
Not configured by default.
Not configured by default.
Remarks
N/A
N/A
N/A
N/A