Mirroring Pcm, Rtp Packets, Or Voice Command Data On A Digital Voice Subscriber Line; Displaying And Maintaining Digital Voice Subscriber Lines - HP FlexNetwork MSR Series Configuration Manual

Step
2. Enter voice view.
3. Enable the router to treat
DISCONNECT messages
with PI 8 as standard
DISCONNECT messages.
Mirroring PCM, RTP packets, or voice command
data on a digital voice subscriber line
The mirroring function copies the specified PCM, RTP, and voice command data on a digital voice
subscriber line to the specified destination. With the mirroring function, you can analyze and locate
problems.
To mirror PCM, RTP, or voice command data on a digital voice subscriber line to a specified interface
or destination:
Step
1. Enter system view.
2. Enter digital voice
subscriber line view.
3. Mirror PCM, RTP, or
voice command data to
a specified interface or
destination.
Displaying and maintaining digital voice
subscriber lines
Task
Display configurations of digital
voice subscriber lines.
Command
voice-setup
call disc-pi-off
Command
system-view
subscriber-line line-number
•
Mirror PCM or RTP data based on a calling
number:
mirror number number { pcm | { in | out |
all } data } calling calling-number to
{ local-interface interface-type
interface-number [ mac H-H-H ] | remote-ip
ip-address [ port port ] }
•
Mirror PCM data based on a timeslot:
mirror number number pcm { bdsp | fdsp }
channel-number to { local-interface
interface-type interface-number [ mac
H-H-H ] | remote-ip ip-address [ port port ] }
•
Mirror RTP or voice command data on all
timeslots:
mirror number number { in | out | all }
{ command | data } to { local-interface
interface-type interface-number [ mac
H-H-H ] | remote-ip ip-address [ port port ] }
Command
display voice subscriber line
[ slot-number:{ { ts-set-number |
ts-set-number.sub-timeslot } | 15 | 23 } ]
[ brief ] [ | { begin | exclude | include }
regular-expression ]
91
Remarks
N/A
By default, the router does not
disconnect a call when it receives
a DISCONNECT message with PI
8.
Remarks
N/A
N/A
Optional.
By default, no traffic is
mirrored.
Remarks
Available in any view.