Creating A Voip Voice Entity; Configuring Basic Functions - HP FlexNetwork MSR Series Configuration Manual

Creating a VoIP voice entity

Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Create VoIP voice entity and
enter its view.
5. Configure a number
template on the terminating
router.
6. Configure a policy for routing
from the VoIP voice entity to
the terminating VoIP
gateway.
7. Configure an area ID.
8. Configure the DSCP subfield
of the ToS field in IP packets
of the RTP stream carried by
the VoIP voice entity.

Configuring basic functions

Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Create a VoIP voice entity
and enter VoIP voice entity
view.
Command
system-view
voice-setup
dial-program
entity entity-number voip
match-template match-string
•
address sip { dns
domain-name [ port
port-number ] | enum-group
group-number | ip
ip-address [ port
port-number ] | proxy |
server-group
group-number }
•
address { ip ip-address |
ras }
area-id string
dscp media dscp-value
Command
system-view
voice-setup
dial-program
entity entity-number voip
15
Remarks
N/A
N/A
N/A
N/A
By default, no called number
template is configured for the
voice entity.
Use either command.
By default, no policy is configured.
Optional.
By default, no area ID is
configured.
If the routing policy is SIP, this
command is unavailable.
Optional.
The default is EF (101110).
Remarks
N/A
N/A
N/A
N/A