Configuring Outbound Sip Proxy Server Information For A Sip Ua - HP FlexNetwork MSR Series Configuration Manual

Hide thumbs Also See for FlexNetwork MSR Series:
Table of Contents

Advertisement

To configure user information:
Step
1.
Enter system view.
2.
Enter voice view.
3.
Enter voice dial program
view.
4.
Enter POTS voice entity
view.
5.
Configure user information.
Configuring outbound SIP proxy server
information for a SIP UA
An outbound SIP proxy server resides between an internal network and a public network. An internal
SIP UA sends all request messages to the outbound proxy server to communicate with the registrar
and proxy server on the public network. The outbound proxy server routes the SIP request
messages to the public network according to their Request-Line header fields.
To configure the outbound proxy server information for a SIP UA:
Step
1.
Enter system view.
2.
Enter voice view.
3.
Enter SIP client view.
4.
Configure the outbound
proxy server information for
the SIP UA.
Configuring transport layer protocol for SIP calls
This section describes how to configure UDP and TCP as the transport layer protocol for SIP
outgoing and incoming calls.
Configuring UDP or TCP for outgoing SIP calls
The execution of the transport command in SIP client view specifies the global transport layer
protocol for outgoing SIP calls. If you want to configure a different transport layer protocol for
individual calls, you can specify the transport layer protocol in corresponding VoIP voice entity view.
If the transport layer protocol configured in VoIP voice entity view and that configured in SIP client
view are different, the former is adopted.
Command
system-view
voice-setup
dial-program
entity entity-number pots
uri user-info [ domain
domain-name ]
Command
system-view
voice-setup
sip
outbound-proxy { dns
domain-name | ipv4 ip-address }
[ port port-number ]
147
Remarks
N/A
N/A
N/A
N/A
Optional.
By default,
number@SIP-device-domain-n
ame or number
@SIP-interface-IP-address is
used to send request messages.
Remarks
N/A
N/A
N/A
By default, no outbound proxy
server information is configured
for the SIP UA.

Advertisement

Table of Contents
loading

Table of Contents