Configuration Procedure (4: Enum) - HP FlexNetwork MSR Series Configuration Manual

Step
4. Set the DNS lookup mode.
5. Exit the SIP view.
6. Enter voice dial program
view.
7. Enter VoIP entity view.
8. Configure the domain name.
For more information about DNS, see HPE FlexNetwork MSR Router Series Comware 5 Layer 3—IP
Services Configuration Guide.

Configuration procedure (4: ENUM)

With the ENUM feature, the device translates the destination number into the corresponding URL
according to the matching ENUM translation rule, and uses this URL to perform DNS lookup.
To configure SIP routing (4: ENUM):
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Enter ENUM rule group view.
5. Configure an ENUM
translation rule.
6. Exit SIP view.
7. Enter VoIP entity view.
8. Configure ENUM-based SIP
routing by referencing the
ENUM rule group.
Configuring user information
When accessing the service provider network, configure the user information provided by the service
provider to confirm user identity.
Command
dns-type { a-record | srv }
quit
dial-program
entity entity-number voip
address sip dns domain-name
[ port port-number ]
Command
system-view
voice-setup
dial-program
enum-group group-number
rule tag preference value
match-pattern replacement-rule
domain-name
quit
entity entity-number voip
address sip enum-group
group-number
146
Remarks
Optional.
The default DNS lookup method
is a-record.
If you configure the destination
port by using the address sip
{ dns domain-name [ port
port-number ] | enum-group
group-number }, proxy dns
domain-name [ port
port-number ], or mwi-server dns
domain-name [ port
port-number ] command, the DNS
lookup mode can only be Type-A.
N/A
N/A
N/A
Not configured by default.
Remarks
N/A
N/A
N/A
N/A
Not configured by default.
N/A
N/A
Not configured by default.