Troubleshooting H.323 Gateway - HP FlexNetwork MSR Series Configuration Manual
Hide thumbs
Also See for FlexNetwork MSR Series:
- Command reference manual (1005 pages) ,
- Configuration manuals (159 pages)
Table of Contents
Advertisement
[RouterB-voice-gk] gk-id gk-center gk-addr 3.3.3.3 1719
# Configure the area ID.
[RouterB-voice-gk] area-id 1#
# Originate registration to the GK.
[RouterB-voice-gk] ras-on
Troubleshooting H.323 gateway
Registration failure
Symptom
The gateway failed to register with the gatekeeper.
Solution
Check that:
1.
The gateway and the gatekeeper can communicate with each other at the network layer with
the ping command.
2.
Execute the display current-configuration command to make the ras-on command takes
effect.
3.
The gatekeeper function is activated at the gatekeeper end.
4.
The area ID is configured on the gatekeeper.
5.
If the node has been logged off, execute the ras-on command on the gateway to re-register
with the gatekeeper.
226
Advertisement
Table of Contents
Troubleshooting
