HP FlexNetwork MSR Series Configuration Manual page 17

Figure 3 Voice function configuration procedure
No
Troubleshoot
Table 1 Description of the voice function configuration procedure
Operation
1. Connect the physical devices according to the network diagram.
2. Configure links and routes and make sure the links and routes are
available.
3. Configure voice entities.
4. Determine whether number substitution is necessary:
If so, configure number substitution for the dial plan.
If not, proceed with the steps below.
5. Configure basic parameters for related voice subscriber lines.
The physical characteristics of voice subscriber lines are usually set
to the default.
Start
Configure a link
connection
Is the link
No
available?
Yes
Configure voice entity
Is number
Yes
substitution
necessary?
No
Configure voice
subscriber line
Configure number
application for dial plans
Configure voice
protocol
Is the call
established?
Yes
End
4
Configure number
substitution for dial
plans
Reference
N/A
Layer 3—IP Routing
Configuration Guide
Configuring voice entities
Configuring dial plans
•
•
Configuring analog voice
subscriber lines
Configuring digital voice
subscriber lines