Configuring Global Default Parameters For Voice Subscriber Lines; Mirroring Pcm, Rtp, Or Voice Command Data On An Analog Voice Subscriber Line; Displaying And Maintaining Analog Voice Subscriber Lines - HP FlexNetwork MSR Series Configuration Manual

Configuring global default parameters for voice
subscriber lines
Step
1. Enter system view.
2. Enter voice view.
3. Configure the default
input/output gain for all
subscriber lines.
For how to use the global default parameters for voice subscriber lines, see "Configuring voice
entities."
Mirroring PCM, RTP, or voice command data on
an analog voice subscriber line
The mirroring function copies the specified pulse code modulation (PCM), voice Real Time Protocol
(RTP), and voice command data on an analog voice subscriber line to the specified destination. With
the mirroring function, you can analyze and locate problems.
To mirror PCM, RTP, or voice command data on an analog voice subscriber line to a specified
interface or destination:
Step
1. Enter system view.
2. Enter analogy voice
subscriber line view.
3. Mirror PCM, RTP packets, or
voice command data to a
specified interface or
destination.
Displaying and maintaining analog voice
subscriber lines
Task
Display analog voice
subscriber-line information.
Command
system-view
voice-setup
default subscriber-line
{ receive | transmit } gain value
Command
system-view
subscriber-line line-number
mirror number number { pcm |
{ in | out | all } { command |
data } } to { local-interface
interface-type interface-number
[ mac H-H-H ] | remote-ip
ip-address [ port port ] }
Command
display voice subscriber-line
[ line-number ] [ brief ] [ | { begin |
exclude | include }
regular-expression ]
54
Remarks
N/A
N/A
Optional.
The default is 0.
Remarks
N/A
N/A
Optional.
By default, no traffic is mirrored.
Remarks
Available in any view.