Configuring Gateways For The Client; Configuring Option 184 Parameters For The Client With Voice Service - HP 830 Series Configuration Manual

Step
2. Enter DHCP address pool
view.
3. Specify the BIMS server IP
address, port number, and
shared key.

Configuring gateways for the client

Step
1. Enter system view.
2. Enter DHCP address pool
view.
3. Specify gateways.
Configuring Option 184 parameters for the client with voice
service
To assign calling parameters to DHCP clients with voice service, you must configure Option 184 on the
DHCP server. For more information about Option 184, see
To configure option 184 parameters in a DHCP address pool:
Step
1. Enter system view.
2. Enter DHCP address pool view.
3. Specify the IP address of the
primary network calling
processor.
4. Specify the IP address of the
backup network calling
processor.
5. Configure the voice VLAN.
6. Specify the failover IP address
and dialer string.
Command
dhcp server ip-pool pool-name
[ extended ]
bims-server ip ip-address [ port
port-number ] sharekey key
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
gateway-list ip-address&<1-8>
Command
system-view
dhcp server ip-pool pool-name
[ extended ]
voice-config ncp-ip ip-address
voice-config as-ip ip-address
voice-config voice-vlan vlan-id
{ disable | enable }
voice-config fail-over
ip-address dialer-string
27
Remarks
N/A
No BIMS server information is
specified by default.
Remarks
N/A
N/A
No gateway is specified by
default.
You can specify up to eight
gateways in a DHCP address pool.
"DHCP address allocation."
Remarks
N/A
N/A
Not primary network calling
processor is specified by default.
To make other configurations take
effect, specify an IP address for the
network calling processor.
Optional.
No backup network calling
processor is specified by default.
Optional.
No voice VLAN is configured by
default.
Optional.
No failover IP address or dialer
string is specified by default.