Configuring An Ipv6 Address Object Group; Configuring A Port Object Group; Configuring A Service Object Group - HP MSR Series Configuration Manual

Configuring an IPv6 address object group

Step
1. Enter system view.
2. Configure an IPv6 address
object group and enter its
view.
3. (Optional.) Configure a
description for the IPv6
address object group.
4. Configure an IPv6 address
object.

Configuring a port object group

Step
1. Enter system view.
2. Configure a port object group
and enter its view.
3. (Optional.) Configure a
description for the port object
group.
4. Configure a port object.

Configuring a service object group

Step
1. Enter system view.
2. Configure a service object
group and enter its view.
3. (Optional.) Configure a
description for the service
object group.
4. Configure a service object.
Command
system-view
object-group ipv6 address
object-group-name
description text
[ object-id ] network { host
{ address ipv6-address | name
host-name } | subnet
ipv6-address prefix-length | range
ipv6-address1 ipv6-address2 |
group-object
object-group-name }
Command
system-view
object-group port
object-group-name
description text
[ object-id ] port { { eq | lt | gt } port
| range port1 port2 |
group-object
object-group-name }
Command
system-view
object-group service
object-group-name
description text
[ object-id ] service { protocol
[ { source { { eq | lt | gt } port | range
port1 port2 } | destination { { eq | lt |
gt } port | range port1 port2 } } * |
icmp-type icmp-code | icmpv6-type
icmpv6-code ] | group-object
object-group-name }
471
Remarks
N/A
The system has one default IPv6
address object group.
By default, an object group does
not have a description.
By default, no object exists in a
user-defined object group.
Remarks
N/A
The system has one default port
object group.
By default, an object group does
not have a description.
By default, no object exists.
Remarks
N/A
The system has one default
service object group.
By default, an object group
does not have a description.
By default, no service object
exists in a user-defined object
group.