Siemens SIMOVERT MASTERDRIVES Manual page 98

01.2006
5.4.3.4 Slave ID
P
MotionControl MotionControl 00
Change slave Slave ID
Config. slave MASTERDRIVES MC
#Slave ID PLUS
Siemens AG 6SE7087-6QX70 (Version AF)
SIMOVERT MASTERDRIVES
With the "Slave ID" function, the user can request information about the
connected slave. The slave ID consists, for example, of the following
lines:
MASTERDRIVES MC
PLUS
6SE7014-0TP50
1.5 kW
V1.0
15.09.1997
Starting from the basic menu, the "Slave ID" function is selected with
"Raise" or "Lower" and activated with "P". As all the lines cannot be
shown at the same time, it is possible to scroll the display as required
with the "Lower" and "Raise" keys. In addition, the slave number is
shown at the top on the right-hand side.
∇
MotionControl 00
Slave ID
6SE7014-0TP50
Example of a slave ID
Compendium Motion Control
∇ ∇
MotionControl 00 MotionControl 00
Slave ID Slave ID
6SE7014-0TP50
1.5 kW
Parameterization
and so on
5-19