Siemens SIMOVERT MASTERDRIVES Manual page 85

Parameterization
Examples:
5.3 Parameter input via the PMU
PMU in units of the
Compact PLUS type
Raise key
Lower key
Toggle key
5-6
Status (r001)
"Ready for ON" (09)
"Ready for ON" (09)
"Operation" (14)
Table 5-5 Influence of drive status (r001) and parameter access (P053) on the
changeability of a parameter
The PMU parameterizing unit enables parameterization, operator
control and visualization of the converters and inverters directly on the
unit itself. It is an integral part of the basic units. It has a four-digit
seven-segment display and several keys.
The PMU is used with preference for parameterizing simple
applications requiring a small number of set parameters, and for quick
parameterization.
Seven-segment display for:
Drive statuses
Alarms and faults
Parameter numbers
Parameter indices
Parameter values
Fig. 5-2 PMU in units of the Compact PLUS type
P053
2 P222 Src n(act) can only be changed via the PMU
6 P222 Src n(act) can be changed via the PMU and
SCom1 (e.g. OP1S)
6 P222 Src n(act) cannot be changed on account of
the drive status
6SE7087-6QX70 (Version AF)
Compendium Motion Control
01.2006
Result
Siemens AG
SIMOVERT MASTERDRIVES