Siemens SIMOVERT MASTERDRIVES Manual page 102

01.2006
5.4.3.8 Menu selection
P
Menu selection Parameter Menu
*User Param. *Gen. Param.
#Param Menu.. Terminals
FixedSet... Communication
Siemens AG 6SE7087-6QX70 (Version AF)
SIMOVERT MASTERDRIVES
The actual parameterization and start-up of the connected slave is
performed by means of the "Menu selection" function. Starting from the
basic menu, the "Menu selection" function is selected with "Lower" or
"Raise". By pressing "P", the unit-specific sub-menu is displayed with
the following choices:
♦ User Param.
♦ Param Menu..
♦ FixedSet...
♦ Quick Param...
♦ Board Conf.
♦ Drive Set
♦ Download
♦ UpR/fr.Access
♦ Power Def.
Two or more dots after these items mean that there is a further sub-
menu level. If "Parameter menu.." is selected, access is possible to all
parameters via correspondingly structured sub-menus. If "UpR/fr.
Access" is selected, direct access is gained to the parameter level.
P
MotionControl Menüauswahl
*Menu selection *User Param.
Upread Param Menu..
Download FixedSet...
Example: Selecting the parameter level by means of UpR/fr.access
2 x
∇
Param Menu
*Gen. Param.
Terminals
#Communication
Example: Selecting a parameter via sub-menus
Compendium Motion Control
7 x
∇
Menu selection
Drive Set.
Download
#UpR/fr.Access
P P
Communication P700.001
*SST1/SST2
Field bus conn. SCom Bus Addrese
SIMOLINK Ser. Interf.1
Parameterization
P
r001 9
Drive Status
Ready
0
5-23