Siemens SIMOVERT MASTERDRIVES Manual page 795

05.2006
Setting of hardware
configuration
Siemens AG 6SE7087-6QX70 (Version AG)
SIMOVERT MASTERDRIVES
As stated above, the master value (KK817, KK820, FD 832) and the
sign-of-life signal (K255, FP 170) are routed to the PROFIBUS where
they are read again and connected on.
To ensure that these values are correctly routed to the PROFIBUS and
can be read again by it, first adapt the hardware configuration of Step 7.
GMC control must continue to be operable as usual.
To be able to use GMC control at all, make sure that GMC Basic has
been installed and that the project has been adapted using the example
P7MC1_EX.
Good help with this is available in file "Getting_started_mc_10.pdf" on
the DriveMonitor CD under path: Gmc\Getting_Started\English.
Please note that in the DB 100, you must enter the PKW and PZD
addresses for the axis concerned in accordance with the hardware
configuration.
Fig. 9-50 Hardware configuration
Fig. 9-51 Master axis CBP address 11
Compendium Motion Control
Technology Option F01
9-147