Siemens SIMOVERT MASTERDRIVES Manual page 328

05.2006
Error Meaning
number
0x00 Non-permissible parameter
number
0x01 Parameter value cannot be
changed
Lower and upper value limit
0x02
exceeded
0x03 Incorrect subindex
0x04 No array
0x05 Wrong data type
0x06 No setting permitted (can only
be reset)
Description element cannot be
0x07
changed
0x08 Reserved
0x09 Description data not available
0x0A Reserved
0x0B No parameter change rights
0x0C Reserved
0x0D Reserved
0x0E Reserved
0x0F No text array available
0x10 Reserved
Task cannot be performed due
0x11
to operating state
0x12 Reserved
0x13 Reserved
0x14 Non-permissible value
Siemens AG 6SE7087-6QX70 (Version AG)
SIMOVERT MASTERDRIVES
Use
Access to parameter that does not exist
Change access to a parameter value
that cannot be changed
Change access with value outside the
value limits
Access to subindex that does not exist
Access with subindex to non-indexed
parameter
Change access with value that does not
correspond with the data type of the
parameter
Change access with value not equal to
0, where this is not permitted
Change access to description element
that cannot be changed
(PROFIdrive Profile V2: PPO write
request not available in Information
Report )
Access to description that does not exist
(parameter value available)
(PROFIdrive Profile V2: Access group
incorrect)
Change access where there are no
parameter change rights
(PROFIdrive Profile V2: Password
wrong)
(PROFIdrive Profile V2: Text in cyclical
traffic cannot be read)
(PROFIdrive Profile V2: Text in cyclical
traffic cannot be read)
Access to text array that does not exist
(parameter value available)
(PROFIdrive Profile V2: No PPO Write)
Access is not possible due to temporary
reasons which have not been specified
in more detail
(PROFIdrive Profile V2: Miscellaneous
error)
(PROFIdrive Profile V2: Data cannot be
read in cyclical traffic)
Change access with value that lies
within the value limits but is not
acceptable for other permanent reasons
(parameter with defined individual
values)
Compendium Motion Control
Communication / PROFIBUS
Additional
info
0
Subindex
Subindex
Subindex
0
0
Subindex
Subindex
-
0
-
0
-
-
-
0
-
0
-
-
Subindex
8.2-41