Siemens SIMOVERT MASTERDRIVES Manual page 764

Technology Option F01
9-116
♦ The configuring package offers the following advantages:
• Transfer of control/checkback signals to technology (one data
area per axis)
• Task interface for definition of MDI and automatic NC blocks and
programs, in addition to transmission ratios, cam tables, etc.
• The task concept is largely identical to the system used on the
SIMATIC WF721/723 positioning modules.
• The communication software provides the user with 8 task boxes
in which he can enter the tasks. These are executed
automatically and enable superior structuring of the user
program.
• A task comprises a task header, with the necessary control
information, and a pointer to the actual user data.
• Resources such as an OP25 operator panel, a STEP 7 program
or a SIMATIC PG programming device can use the task
interface.
♦ Motion Control HMI Package for SIMATIC S7 (see /2/):
Software for the application interface to operator/touch panels
OP25, OP27, OP37, TP37 etc. with standard screens for operating
the positioning axes, including the following functions:
• Block and automatic NC program input
• Input of machine data and cam tables
• Diagnostic screens with definition/display of control and
checkback signals
In manual /1/ you will find detailed descriptions of the configuring
package and HMI package.
6SE7087-6QX70 (Version AG)
Compendium Motion Control
05.2006
Siemens AG
SIMOVERT MASTERDRIVES