Siemens SIMOVERT MASTERDRIVES Manual page 112

01.2006
RS485 interface
5.5.2 Establishing the connection between DriveMonitor and the device
5.5.2.1 Setting the USS interface
Siemens AG 6SE7087-6QX70 (Version AF)
SIMOVERT MASTERDRIVES
The RS485 interface is multi-point capable and therefore suitable for
bus operation. You can use it to connect 31 SIMOVERT
MASTERDRIVES with a PC. On the PC, either an integrated RS485
interface or an RS232 ↔ RS485 interface converter is necessary. On
the device, an RS485 interface is integrated into the -X300 (compact
PLUS -X103) connection. For the cable: see pin assignment -X300 and
device documentation of the interface converter.
You can configure the interface with menu Tools
Fig. 5-8 Online settings
Compendium Motion Control
Parameterization
ONLINE Settings.
5-33