Siemens SIMOVERT MASTERDRIVES Manual page 335

Communication / PROFIBUS
Rules for laying
cables
8.2-48
When you are laying the bus cable, you must not:
♦ twist it
♦ stretch it
♦ or squash it
In addition to this, you must take into account any influences on
electromagnetic compatibility (EMC).
For further information, see for example Chapter 3 of the Compendium or
the description "Instructions for Design of Drives in Conformance with
EMC Regulations" (Order No. 6SE7087-6CX87-8CE0).
6SE7087-6QX70 (Version AG)
Compendium Motion Control
05.2006
Siemens AG
SIMOVERT MASTERDRIVES