Siemens SIMOVERT MASTERDRIVES Manual page 427

Communication / PROFIBUS
8.2.11 Appendix
Technical data
Order number
Size (length x width)
Degree of pollution
Mechanical strength
In stationary use
• displacement
• acceleration
During transport
•
displacement
•
acceleration
Climatic class
Method of cooling
Permissible ambient or coolant
temperature
•
during operation
•
during storage
•
during transport
Permissible moisture stress
Supply voltage
Output voltage
Data transfer rate
8.2-140
CBP: 6SE7090-0XX84-0FF0
CBP2: 6SE7090-0XX84-0FF5
90 mm x 83 mm
Degree of pollution 2 acc. to IEC 664-1 (DIN VDE 0110/T1),
Moisture condensation during operation is not permissible
To DIN IEC 68-2-6 (if board is correctly mounted)
0.15 mm in the frequency range 10 Hz to 58 Hz
2
19.6 m/s in the frequency range > 58 Hz to 500 Hz
3.5 mm in the frequency range 5 Hz to 9 Hz
2
9.8 m/s in the frequency range > 9 Hz to 500 Hz
Class 3K3 to DIN IEC 721-3-3 (during operation)
Natural air cooling
0° C to +70° C (32° F to 158° F)
-25° C to +70° C (-13° F to 158° F)
-25° C to +70° C (-13° F to 158° F)
Relative humidity ≤ 95 % during transport and storage
5 V ± 5 %, max. 600 mA, internally from the basic unit
5 V ± 10 %, max. 100 mA,
electrically isolated supply (X448/Pin 6)
• for bus termination of the serial interface or
•
for supplying an OLP (Optical Link Plug)
max. 12 MBaud
Table 8.2-33 Technical data
≤ 85 % during operation (condensation not
permissible)
6SE7087-6QX70 (Version AG)
Compendium Motion Control
05.2006
Siemens AG
SIMOVERT MASTERDRIVES