Siemens SIMOVERT MASTERDRIVES Manual page 459

Communication / CBC
8.4.2 Mounting methods / CBC slots
NOTE
8.4.2.1 Mounting positions of the CBC in MC Compact PLUS units
NOTE
Position of the slots
DANGER
8.4-4
The CBC can be directly mounted into Compact PLUS units. In all other
types of unit in this series, it is mounted on the CUPM, CUMC or CUVC
or connected in the electronics box with an adapter board.
In principle, the optional CBC board (Communications Board CAN) can
be mounted in any slot. Please bear in mind, however, that an encoder
board always requires Slot C.
SIE MENS
A
S1
X101 B
X103 C
Fig. 8.4-4 Position of the slots (with side wall on the right removed)
Due to the DC link capacitors, hazardous voltages are still present in
the converter up to 5 minutes after it has been disconnected from the
power supply. Before opening the converter, wait until the capacitors
have completely discharged.
Fastening screw for
side cover
Inscription fields for
optional boards
Fastening screw for
side cover
6SE7087-6QX70 (Version AD)
Compendium Motion Control
10.2004
Slot A
Slot B
Slot C
Siemens AG
SIMOVERT MASTERDRIVES