Plc - Plc Function Page - Automation Direct DURApulse GS4 User Manual

Chapter 3: Keypad Operation and Quick-Start

PLC - PLC Function Page

PLC
▼
1:Disable
2:PLC Run
3:PLC Stop
PLC/RUN
▲
F 60.00
▼
H 0.00
v 335.6
JOG 04:10:16
Page 3–12
PLC Function is used to Enable/Disable and Run/Stop the internal PLC.
The active selection is marked by a smiley face character on the far
☻
right of the display.
WARNING: o
deteRmINed by the lAst stAte the keypAd WAs plAced IN
the coNfIGuRed dIGItAl INputs
Gsl
Use the Up and Down Direction keys to select Disable, PLC Run or
PLC Stop.
Press the Enter key to confirm the selection.
Selecting PLC Run will activate the GS4 internal PLC. The keypad
LOC
status Page will display PLC/RUN at the top, center of the display.
Hz
If PLC Stop is selected, the PLC program will stop and the Status
Page will display PLC/STOP at the top center of the page. Selecting
Hz
Disable will disable the GS4 internal PLC and return control to the
drive. Selecting PLC Run or PLC Stop also can determine whether
Vdc
the physical I/O are controlled by the Drive or are controlled by the
PLC. See Chapter 8 for more information on the integrated PLC and
GSLogic software.
DuRA
pulse
N A poWeR cycle the
, /
oGIc thAt RuN stop stAte mAy Not be tRue oN A poWeR cycle
GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
plc /
RuN stop stAte WIll be
,
. I
f the stAte WAs chANGed vIA
oR by
.