Automation Direct DURApulse GS4 User Manual page 63

m C C
ain irCuiT rimp
d = mm
imensions
f s C (gs4
rame ize
NOTE: Crimp connectors are NOT required on A, B, and C frame drives.
NOTE: Heat shrink should comply with UL (600V, YDPU2).
Power Terminal Wiring Connectors:
f s d0 (gs4
rame ize
NOTE: Crimp connectors ARE required on D0, D, E, F, and G frame drives.
NOTE: Heat shrink should comply with UL (600V, YDPU2).
Power Terminal Wiring Connectors:
(except Ground Terminal Connectors)
GROUND Terminal Wiring Connectors ONLY:
22 Max.
8.2 Min.
Ring lug
DuRA
GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
pulse
C s
onneCTor peCifiCaTions
# : 2020, 2025, 2030, 4025, 4030, 4040)
model s
Heat Shrink Tubing:
# : 4050, 4060)
model s
8.2 Min.
Ring lug
Chapter 2: Installation and Wiring
( )
ConTinued
Heat Shrink Tubing:
(non-ground power connectors)
Heat Shrink Tube
WIRE
Heat Shrink Tubing:
(ground terminal power connectors)
Heat Shrink Tube
WIRE
Page 2–25