Automation Direct DURApulse GS4 User Manual page 174

Chapter 4: AC Drive Parameters
P3.30 Multi-Function Virtual Output 14 (DO19) or (PLC Y16)
Range/Units (Format: 16-bit unsigned)
Same as P3�17~P3�31
This parameter sets the function of Multi-Function Virtual Output 14 (PLC DO19).
This output is a virtual terminal used by the PLC; there is no physical wiring point.
• Represented by Bit 14 on the "DO Status" (P3�47) bit map�
• NO/NC behavior is controlled by Bit 14 in P3�43�
P3.31 Multi-Function Virtual Output 15 (DO20) or (PLC Y20)
Range/Units (Format: 16-bit unsigned)
Same as P3�17~P3�31
This parameter sets the function of Multi-Function Virtual Output 15 (PLC DO20).
This output is a virtual terminal used by the PLC; there is no physical wiring point.
• Represented by Bit 15 on the "DO Status" (P3�47) bit map�
• NO/NC behavior is controlled by Bit 15 in P3�43�
Page 4–80
(page 4–74)
(page 4–74)
DURA
GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
pulse
Type Hex Addr Dec Addr
♦R/W 031E 40799
Default
0
Type Hex Addr Dec Addr
♦R/W 031F 40800
Default
0