Automation Direct DURApulse GS4 User Manual page 100

Chapter 4: AC Drive Parameters
d P
igital araMeters
For detailed information about the P3.xx parameter group, please refer to
Parameter
1) ♦ in the Run-Read/Write column indicates that the parameter can be set during RUN mode.
R/W indicates "read/write. "
Read indicates "read-only. "
2) Parameters can be restored to their default values using P9.08.
1st Source of Operation
P3.00
Command [Remote]
2nd Source of Operation
P3.01
Command [Local]
P3.02
2/3 Wire Operation Mode
Page 4–6
s (P3. )
uMMary xx
GS4 Parameters Summary – Digital Parameters (P3.xx)
Range
0: Digital Keypad
1: External Terminal; Keypad/RS-485 STOP is
enabled
2: External Terminal; Keypad/RS-485 STOP is
disabled
3: RS485 (Modbus/BACnet); Keypad STOP is
enabled
4: RS485 (Modbus/BACnet); Keypad STOP is
disabled
5: Comm Card; Keypad STOP is enabled
6: Comm Card; Keypad STOP is disabled
0: 2-wire mode 1 (Fwd, Rev)
1: 2-wire mode 2 (Run, Direction)
2: 3-wire mode
(table continued next page)
DURA
pulse
Run
Read/
Write
R/W
R/W
R/W
GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
page 4–63.
Modbus
1)
Settings
Address
2)
Hex Dec Default
0300 40769 0
0301 40770 0
0302 40771 0
User