Automation Direct DURApulse GS4 User Manual page 64

Chapter 2: Installation and Wiring
m C
ain irCuiT
d
imensions
f s d (gs4
rame ize
NOTE: Crimp connectors ARE required on D0, D, E, F, and G frame drives.
NOTE: ADC ring terminal part #s for GS4 A-frame drives:
V70RK004011, V70RK004012, V70RK004017, V70RK004018
NOTE: Heat shrink should comply with UL (600V, YDPU2).
Power Terminal Wiring Connectors:
f s e (gs4
rame ize
NOTE: Crimp connectors ARE required on D0, D, E, F, and G frame drives.
NOTE: Heat shrink should comply with UL (600V, YDPU2).
Power Terminal Wiring Connectors:
(except Ground Terminal Connectors)
GROUND Terminal Wiring Connectors ONLY:
Page 2–26
C C s
rimp onneCTor peCifiCaTions
= mm
# : 2040, 2050, 4075, 4100)
model s
# : 2060, 2075, 2100, 4125, 4150)
model s
31MAX.
26.5MAX.
28.0MAX.
DuRA
( )
ConTinued
Heat Shrink Tubing:
Heat Shrink Tubing:
GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
pulse