Introduction - ST STM32F413 Reference Manual

RM0430

26

Fast-mode Plus Inter-integrated circuit (FMPI2C)
interface
26.1

Introduction

2
The I C (inter-integrated circuit) bus interface handles communications between the
microcontroller and the serial I
bus-specific sequencing, protocol, arbitration and timing. It supports Standard-mode (Sm),
Fast-mode (Fm) and Fast-mode Plus (Fm+).
It is also SMBus (system management bus) and PMBus (power management bus)
compatible.
DMA can be used to reduce CPU overload.
26.2 FMPI2C main features
2
•
I C bus specification rev03 compatibility:
–
–
–
–
–
–
–
–
–
–
–
–
–
•
1-byte buffer with DMA capability
• Programmable analog and digital noise filters
Fast-mode Plus Inter-integrated circuit (FMPI2C) interface
2
Slave and master modes
Multimaster capability
Standard-mode (up to 100 kHz)
Fast-mode (up to 400 kHz)
Fast-mode Plus (up to 1 MHz)
7-bit and 10-bit addressing mode
Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
All 7-bit addresses acknowledge mode
General call
Programmable setup and hold times
Easy to use event management
Optional clock stretching
Software reset
DocID029473 Rev 3
C bus. It provides multimaster capability, and controls all I
2
C
753/1284
819