Table of Contents
Advertisement
19.1
Overview
The H8/3062F-ZTAT A-mask version has 128 kbytes of on-chip flash memory. The flash memory
is connected to the CPU by a 16-bit data bus. The CPU accesses both byte data and word data in
two states, enabling rapid data transfer.
The on-chip ROM is enabled and disabled by setting the mode pins (MD
table 19.1.
The on-chip flash memory product (H8/3062F-ZTAT A-mask version) can be erased and
programmed on-board, as well as with a special-purpose PROM programmer.
Table 19.1 Operating Modes and ROM
Mode
Mode 1 (expanded 1-Mbyte mode with on-chip ROM
disabled)
Mode 2 (expanded 1-Mbyte mode with on-chip ROM
disabled)
Mode 3 (expanded 16-Mbyte mode with on-chip ROM
disabled)
Mode 4 (expanded 16-Mbyte mode with on-chip ROM
disabled)
Mode 5 (expanded 16-Mbyte mode with on-chip ROM
enabled)
Mode 6 (single-chip normal mode)
Mode 7 (single-chip advanced mode)
Section 19 Flash Memory
[H8/3062F-ZTAT A-Mask Version]
to MD
2
Mode Pins
MD2
MD1
MD0
0
0
1
0
1
0
0
1
1
1
0
0
1
0
1
1
1
0
1
1
1
) as shown in
0
On-Chip ROM
Disabled (external
address area)
Enabled
569
Advertisement
Table of Contents
