Replacing The Toner Cartridge - Canon imageCLASS MF8180C Starter Manual

Replacing the Toner Cartridge

∗
When <PREPARE NEW CART> and then <REPLACE
toner cartridge of the indicated color with a new toner cartridge.
∗
Indicates either "C", "M", "Y", or "K".
Replacing the Toner Cartridge
1
Press [Menu].
2
]
Press [ ] or [ to select
<10.MAINTENANCE>, then press [OK].
3
]
Press [ ] or [ to select <1.CHANGE
CARTRIDGE>, then press [OK].
4
Press [ ] or [ ] to select the cartridge to be
replaced, then press [OK].
You can select from the following:
– BLACK
– CYAN
– MAGENTA
– YELLOW
– ALL COLORS
5
Lift the scanning platform (A) and open the
cartridge cover until it is locked (B) when the
whirring sound stops.
A
B
51
∗
CARTRIDGE> appears in the LCD, replace the
6
Make sure that the toner cartridge you want to
replace is at the position for replacing.
If the spent toner cartridge is not in the replacement
position, close the cover, then open it again when the
whirring sound stops. Repeat this process until the
cartridge you want to replace is in the correct position.
7
Remove the toner cartridge from the machine.
Press and hold the blue buttons on the top of the toner
cartridge and lift it straight up.
8
Confirm the color of the label on the toner
cartridge holder, then take out a toner cartridge
of the same color from the protective bag.
Open the protective bag with scissors, so as not to
damage the cartridge.
NOTE
• Keep the protective bag in which the cartridge came
in. It may be required when taking out the toner
cartridge for machine maintenance.
• Be careful not to hold or touch the prohibited portions
such as the sensor (A) or electrical contacts (B). It
may result in damage to the machine.
B
A
9
Hold the toner cartridge as shown in the figure,
shake it gently 5 or 6 times from side to side,
then back and forth to evenly distribute the
toner inside.
NOTE
• If toner is not distributed evenly, it may result in a
deterioration of the print quality. Be sure to carry out
this procedure properly.
• Be sure to shake the toner cartridge gently. Toner may
spill if the cartridge is handled without caution.
10
Remove the protective cover.
Pull down the tab on the protective cover (A) as shown in
the figure.
A
NOTE
• Remove the cover carefully as if may be snug.
• Do not touch or hold the development roller (A). The
image quality may deteriorate if you do so. Do not
apply shock to the toner cartridge memory (B) or bring
it near magnetic waves as this may result in damage
to the machine.
B
A
• Keep the protective cover with which the cartridge
from removed. It may be required when taking out the
toner cartridge for machine maintenance.
52