Table of Contents
Advertisement
4.9.5 DHCP SERVER
The Dynamic Host Configuration Protocol (DHCP) is a network protocol enabling a server to
automatically assign an IP address to a computer from a defined range of numbers configured
for a given network.
Status Settings
The Status Settings page allows you to configure the DHCP server mode (enabled or disabled).
To access this page, click Management > DHCP Server > Status Settings.
Figure 118: Management > DHCP Server > Status Settings
The following table describes the items in the previous figure.
Item
DHCP Server
Select Enable or Disable to designate the DHCP server function type.
When a new DHCP server mode is selected, the switch requires a system restart
for the new mode to take effect.
Apply
Click Apply to save the values and update the screen.
Restart
Click Restart to have the switch perform a system restart function. In the event
that the IP settings are changed, the DHCP server must be restarted for the IP
settings to take effect.
Table 106: Management > DHCP Server > Status Settings
175
eWorx SE500 Series Switches
Description
:
Advertisement
Table of Contents
