Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
SNTP Server
Type
Port
Priority
Version
Refresh
Add
Edit
Remove
To add a new SNTP server:
Click System > Advanced Configuration > SNTP > Server Configuration > Add.
Figure 4.65 System > Advanced Configuration > SNTP > Server Configuration >
The following table describes the items in the previous figure.
Item
Host Name or IP
Address
Port
Priority
Version
Submit
Cancel
Server Status
EKI-9500 Series User Manual
Description
The address or host name of an SNTP server the device can use to
synchronize the system time.
The configured SNTP server address type, which can be IPv4, IPv6,
or DNS.
The UDP port on the server to which SNTP requests are sent.
The order in which to query the servers. The SNTP client on the
device continues sending SNTP requests to different servers until a
successful response is received or all servers are exhausted. A server
entry with a lower priority value is queried before one with a higher pri-
ority. If more than one server has the same priority, the SNTP client
contacts the servers in the order that they appear in the table.
Specifies the NTP version running on the server.
Click Refresh to update the screen.
Click Add to add a new SNTP server.
Click Edit to edit the selected entries.
Click Remove to remove the selected entries.
Add
Description
Specify the IPv4 address, IPv6 address, or DNS-resolvable host
name of the SNTP server. Unicast SNTP requests will be sent to this
address. The address you enter is displayed in the SNTP Server field
on the main page. The address type is automatically detected.
The UDP port on the server to which SNTP requests are sent.
The order in which to query the servers. The SNTP client on the
device continues sending SNTP requests to different servers until a
successful response is received or all servers are exhausted. A server
entry with a lower priority value is queried before one with a higher pri-
ority. If more than one server has the same priority, the SNTP client
contacts the servers in the order that they appear in the table.
Specifies the NTP version running on the server.
Click Submit to save the values.
Click Cancel to close the window.
74
Advertisement
Table of Contents
