Dhcp Server; Figure 4.113 Management > Dhcp Server > Status Settings; Figure 4.114 Management > Dhcp Server > Global Settings - Advantech EKI-7708 Series User Manual

4.9.5

DHCP Server

The Dynamic Host Configuration Protocol (DHCP) is a network protocol enabling a
server to automatically assign an IP address to a computer from a defined range of
numbers configured for a given network.
4.9.5.1 Status Settings
The Status Settings page allows you to configure the DHCP server mode (enabled or
disabled).
To access this page, click Management > DHCP Server > Status Settings.
Figure 4.113 Management > DHCP Server > Status Settings
The following table describes the items in the previous figure.
Item
DHCP Server
Apply
Restart
The ensuing table for Status Information settings are informational only: DHCP
Server Service.
4.9.5.2 Global Settings
The Global Settings page allows you to configure the global settings for the DHCP
function.
To access this page, click Management > DHCP Server > Global Settings.
Figure 4.114 Management > DHCP Server > Global Settings
EKI-7708 Series User Manual
Description
Select Enable or Disable to designate the DHCP server function
type.
When a new DHCP server mode is selected, the switch requires a
system restart for the new mode to take effect.
Click Apply to save the values and update the screen.
Click Restart to have the switch perform a system restart function. In
the event that the IP settings are changed, the DHCP server must be
restarted for the IP settings to take effect.
111