Reed Valve; Kick Starter & Gear Shifting Parts Outside Crankcase - Suzuki MT50 Service & Parts Manual

B. If engine rpm is too high:
Clearance between the clutch cork plates
*
and steel plates is larger than standard.
The clutch rollers are arranged incorrectly.
*

9-16. Reed valve

The reed valve is m?de of special steel so wear
is very small.
After long use, however,
sometim · e s wear so when removing the crank­
cace right cover or overhauling th� engine,
inspect the reed valve for wear and gas leak
around the reed valve.
leak, replace the reed valve assembly.
Do not disassemble
precisionmade and its valve operation may
change after it is reassembiE:d.
9-17. Kick Starter
Outside Crankcase
9-17-1. Kick starter parts
A. Removing
Fig. 9 - 17-2 .
Removing crar;1kcase right
cover gasket
46
the reed valves
If found wear or gas
the reed valve as it is
& Gear Shifting Parts
Fig. 9-16-1 Removing reed valve from
crankcase right cover
Fig. 9-16-2 Reed valve assembly
���:
rubbtr
®
bolt
()) F itti"'
® Lock wuhtr
<I>Oilst�l
<1> fll tu rn sprin11ukie
Cl)Rttu r n sprirw
(J)Qrclip
{j) lllt tu r n sprinc rttlinec
Fig. 9-17-1 Kick starter parts outside
crankcase
Fig. 9-17-3
Removing kick starter.shaft
return spring guide
'I