Operator Control And Monitoring Of Ieph - Siemens SIMATIC PCS 7 Function Manual

BATCH interface blocks
2.1 IEPH
2.1.2

Operator Control and Monitoring of IEPH

Controlling and Monitoring of IEPH
The following table shows the assignment of the parameters of the IEPH block to the
input / output fields of the corresponding faceplate for the following views:
● Function
● Charge
● Setpoints
● Materials
Representation Input/output field
Function "Status" display
LED "Runtime error"
"Error" LED
LED "Manual"
Buttons "T", "H", B": Status in string,
hexadecimal, and binary format
Operation and display "Function"
Enable for BATCH
Occupy
"Start" Button
"Cancel" button
"Stop" button
"Hold" button
"Terminate" button
"Reset" button
"Resume" button
16
User authorization
-
-
-
-
-
Can only be operated if
no batch is enabled and
occupied and if WinCC
has set user authorization
level 5 or 6.
SIMATIC BATCH Interface Blocks V7.1
Function Manual, 03/2009, A5E02171101-01
Block parameters
QUSTAT_L
QUSTAT_L bit 19
QUSTAT_L bit 31
QUSTAT_L bit 17
(if = 0)
-
BA_EN bit 18
OCCUPIED bit 24
ISTART or ICTRL bit 0
IABORT or ICTRL bit 2
ISTOP or ICTRL bit 6
IHOLD or ICTRL bit 1
ITERM or ICTRL bit 4
IRESET or ICTRL bit 3
ISTART or ICTRL bit 0