Antistatic Mat; Tools Needed For Service; Fillers - Oracle SPARC T8-2 Service Manual

attach an antistatic strap to your wrist and then to a metal area on the chassis. Following this
practice equalizes the electrical potentials between you and the server.
Note -
However, antistatic wrist straps are still included with options.

Antistatic Mat

Place ESD-sensitive components such as motherboards, memory, and other PCBs on an
antistatic mat.
Related Information
"Prevent ESD Damage" on page 55
■
"Tools Needed For Service" on page 47
■

Tools Needed For Service

You need the following tools for most service operations:
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
2.5 mm hex driver or key
■
Pen or pencil (to power on server)
■
Related Information
"Safety Information" on page 45
■

Fillers

A filler is an empty metal or plastic enclosure that is installed at the factory or in the field into
a server component slot that does not contain a functioning component. The filler panels ensure
An antistatic wrist strap is no longer included in the accessory kit for this server.
Tools Needed For Service
Preparing for Service 47