Log In To Oracle Ilom (Service) - Oracle SPARC T5-8 Service Manual

Log In to Oracle ILOM (Service)

Related Information
"Diagnostics Process" on page 25
■
"Log In to Oracle ILOM (Service)" on page 28
■
"Oracle ILOM Service-Related Tools" on page 29
■
Oracle ILOM Documentation Library
■
Log In to Oracle ILOM (Service)
1. At the terminal prompt, type:
ssh root@IP-address
Password:
Oracle (R) Integrated Lights Out Manager
Version 3.2.1.2 rXXXXX
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
->
Note -
and its password are provided with the system. To build a secure environment, you must change
the default password (changeme) for the default Administrator account (root) after your initial
login to Oracle ILOM. If this default Administrator account has since been changed, contact
your system administrator for an Oracle ILOM user account with Administrator privileges.
Enable the Oracle ILOM 3.0 legacy name spaces.
2.
set /SP/cli legacy_targets=enabled
->
Note -
/System. You can still use the 3.0 legacy names in commands at any time, but to expose the
legacy names in the output, you must enable them. This manual uses the legacy names in the
command examples and shows the names in the output examples. For more information about
the new name spaces, see the Oracle ILOM documentation.
Related Information
"Diagnostics Process" on page 25
■
"Tool Availability" on page 27
■
"Oracle ILOM Service-Related Tools" on page 29
■
28 SPARC T5-8 Server Service Manual • November 2015
password
To enable first-time login and access to Oracle ILOM, a default Administrator account
In Oracle ILOM 3.1, the name spaces for /SYS and /STORAGE were replaced with