Log In To Oracle Ilom (Service) - Oracle SPARC T8-1 Service Manual

Log In to Oracle ILOM (Service)

Step
2.
3.
Related Information
"Interpreting LEDs" on page 27
■
"Performing Advanced Troubleshooting" on page 32
■
"Clear a Fault Manually" on page 37
■
Log In to Oracle ILOM (Service)
At the terminal prompt, type:
ssh root@SP-IP-address
Password: password
Oracle (R) Integrated Lights Out Manager
Version Version 4.0.x
Copyright (c) 2017, Oracle and/or its affiliates, Inc. All rights reserved.
->
Related Information
"Identify Faulted Components" on page 23
■
"Identify Disabled Components" on page 25
■
"Component Names Displayed by Diagnostic Software" on page 26
■
22 SPARC T8-1 Server Service Manual • January 2022
Description
Run the show disabled command to
display information about components
that have been disabled either
intentionally or because of a failure.
Plan to service any components that are
degraded or might need service soon to
minimize system downtime.
Identify the names of components that
require service as reported by diagnostic
software.
Links
"Identify Disabled Components" on page 25
"Component Names Displayed by Diagnostic
Software" on page 26