Log In To Oracle Ilom (Service) - Oracle SPARC T7-4 Service Manual

Log In to Oracle ILOM (Service)

No. LED
6 AC 2 (left) and AC 3 (right)
power LEDs
7 Locator LED and button
(white)
8 Server Service Required
LED (amber)
9 Power OK LED (green)
10 SP LED
11 Overtemp LED(amber)
Log In to Oracle ILOM (Service)
1. At the terminal prompt, type:
ssh root@IP-address
Password: password
Oracle (R) Integrated Lights Out Manager
Version 3.2.1.2 rXXXXX
32 SPARC T7-4 Server Service Manual • May 2017
Icon or Label Description
Indicates these conditions:
■ Off – No power is applied to the server.
■ Green – Power is applied to the server.
Turn on the Locator LED by pressing the Locator button, or see
"Locate the Server" on page
The fmadm faulty command provides details about any faults that
cause this indicator to light. See
Under some fault conditions, individual component fault LEDs are lit
in addition to the Service Required LED.
Indicates these conditions:
■ Off – Server is not running in its normal state. System power might
be off. The SPM might be running.
■ Steady on – Server is powered on and is running in its normal
operating state. No service actions are required.
■ Fast blink – Server is running in standby mode and can be quickly
returned to full function.
■ Slow blink – A normal but transitory activity is taking place. Slow
blinking might indicate that system diagnostics are running or that
the system is booting.
SP Indicates these conditions:
■ Off – AC power might have been connected to the power supplies.
■ Steady on, green – SPM is running in its normal operating state.
No service actions are required.
■ Blink, green – SPM is initializing the Oracle ILOM firmware.
■ Steady on, amber – An SPM error has occurred and service is
required.
Indicates these conditions:
■ Off – Indicates a steady state, no service action is required.
■ Steady on – Indicates that a temperature failure event has been
acknowledged and a service action is required.
49. When lit, the LED blinks rapidly.
"Check for Faults" on page 33.