7. Setting Method
Displays printer setting method.
• Auto
Appears if the printer is used by IP address specified automatically.
• Manual
Appears if the printer is used by IP address specified manually.
Note
• If USB is selected from the pulldown menu on the toolbar, "-" is displayed for the interface
(wireless/wired LAN) disabled on the printer setting.
8. MAC Address
Displays the MAC address of the detected printer.
Note
• If USB is selected from the pulldown menu on the toolbar, "-" is displayed for the interface
(wireless/wired LAN) disabled on the printer setting.
9. Device Name
Displays the printer device name if it is registered.
Note
• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.
Assigning Printer Information
10. IPv6
On appears when an IPv6 address is assigned for the printer.
Note
• If USB is selected from the pulldown menu on the toolbar, "-" is displayed.
Menus on IJ Network Device Setup Utility Screen
This section describes menus on IJ Network Device Setup Utility screen.
256
Need help?
Do you have a question about the imagePROGRAF PRO-2000 and is the answer not in the manual?
Questions and answers