◦ RAW protocol
Enables/Disables RAW printing.
Enables/Disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Wireless LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when using wireless LAN.
◦ Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the printer is connected to a
device compatible with wired LAN.
◦ Direct connection settings
Setting items are available when you connect a device to the printer.
• You can select these setting items only when Activate direct connect. is selected for Change
■ Update SSID/password
■ Selecting Yes updates the identifier (SSID) and password for direct connection.
◦ Direct connection device name
Changes the printer's name displayed on a Wi-Fi Direct compatible device.
◦ Connection request confirmation
Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is connecting
Connecting Smartphone/Tablet to Printer Directly via Wireless LAN (Direct Connection)
• Reset LAN settings
Initializes the network settings on the printer.
After resetting, perform setup again as necessary.