The procedure for printing a document with pages enlarged or reduced is as follows:
1. Open the
printer driver setup window
2. Select the paper size of the document
Using Page Size, select the page size that is set with your application software.
3. Select the paper source
For Paper Source, select the setting that matches your purpose.
• The paper feed method will differ according to the paper or lower level (roll paper 2) settings, or
roll unit option settings.
4. Select roll paper width
If you selected a roll paper for Paper Source, set Roll Paper Width to the width of the roll paper loaded
in the printer.
5. Select scaled printing
Check the Enlarged/Reduced Printing check box.
6. Set one of scaling methods described below
From the items listed below, select the setting that matches your purpose and select the corresponding
The current settings are displayed in the settings preview on the left side of the window.