Setting The Number Of Copies And Printing Order - Canon imagePROGRAF PRO-2000 Online Manual

Setting the Number of Copies and Printing Order

The procedure for specifying the number of copies and printing order is as follows:
1. Open the printer driver setup window
2. Specify the number of copies to be printed
For Copies on the Layout tab, specify the number of copies to be printed.
3. Specify the print order
Check the Print from Last Page check box when you want to print from the last page in order, and
uncheck the check box when you want to print from the first page.
4. Complete the setup
Click OK.
When you execute print, the specified number of copies will be printed with the specified printing order.
Important
• When the application software that you used to create the document has the same function, specify the
settings on the printer driver. However, if the print results are not acceptable, specify the function
settings on the application software. When you specify the number of copies and the printing order with
both the application software and this printer driver, the number of copies may be multiplied numbers of
the two settings or the specified printing order may not be enabled.
466