Canon imagePROGRAF PRO-2000 Online Manual page 203

2. As entering the root certificate name is required, enter an arbitrary certificate name and
select OK.
The root certificate registration is completed.
Note
• If PIN or password is not set as security type, the attention screen may appear. Select OK, and
then set the security type to PIN or password.
After Root Certificate Registration
We recommend that you make sure that the correct root certificate has been registered.
To make sure that the correct root certificate has been registered, make sure that thumbprint of
certificate information matches printer's thumbprint. Follow the steps below.
Note
• Some Android devices cannot be checked the thumbprint of a registered route certificate.
1. From Settings menu on your device, select Security, Trust credentials, and USER.
The list of downloaded certificates appears.
2. Select downloaded certificate.
The certificate information appears.
3. Make sure that thumbprint of certificate information matches printer's thumbprint.
For printer's thumbprint, touch the HOME button, select Device settings > LAN settings >
Confirm LAN settings, check Root cert. thumbprint (SHA-1) or Root cert. thumbprint
(SHA-256).
4. If thumbprint of certificate information screen matches printer's thumbprint, select OK.
The root certificate registration is completed.
If the message to warn you that the secure connection is not guaranteed appears when you select
Log on on Remote UI after registering the root certificate, restart the web browser. The message
will not appear on the web browser.
Note
• Depending on the Android device, a warning may appear even after registering the proper root
certificate.
For Mobile Safari on iOS
1. Select Download on Remote UI.
Downloading the root certificate is started and then Install Profile screen is displayed.
2. Select Install.
The Warning screen appears.
203