Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, ink may be transferred onto the paper surface
during ejection, soiling it. In that case, you may be able to improve the condition by setting the time to wait
for the ink to dry after printing.
• If the Cutter touches the print surface on which the ink is not dry, the paper surface may become
scratched or soiled, or the paper surface may rub when the paper falls and the surface may become
To wait for the ink to dry without allowing printed materials to fall after printing, set Cutting mode on the
printer menu to Eject cut. (See
• The settings can also be made from the touch screen on the printer. From Paper settings, select
Paper settings > Advanced and set Pause between scans and Pause between pages.
1. Display the printer driver dialog box.
"How to Open the Printer Driver Setup
2. Select Main sheet and click Specify for Media Type.
"Specifying the Cutting Method for