Canon imagePROGRAF PRO-2000 Online Manual page 84

Note
• If the Home screen does not appear, tap the Home button.
2. Tap paper feed slot where roll paper for which you want to set cutting method is loaded.
3. Tap Paper settings.
4. Tap Advanced.
5. Tap Cutting mode.
6. Tap User cut.
7. When Do you want to set to detect the leading edge of the paper? is displayed, select
Detect (recommended).
8. Print the job.
The printer stops advancing the paper after printing.
9. Tap Advance paper.
Roll paper is fed to the specified cut position and then automatically stopped.
10. Cut the roll paper manually with scissors or the like.
84