Select the color to print.
Prints with the number of colors in the document.
Prints a color document in monochrome.
This mode is appropriate when printing an image such as a photo in monochrome.
You can adjust individual color settings such as Cyan, Magenta, Yellow, Brightness, and
Contrast on the Color Adjustment tab, and select the Color Correction method on the
You can also set clear coat settings on the Clear Coating tab.
Thicken Fine Lines
Prints thin lines thicker for easier viewing.
Preview before printing
You can start up the Canon imagePROGRAF Preview, and check what the printing results will be
before executing the print.
Check this check box to display a preview before printing.
Displays the status monitor.
Opens the About dialog box.
You can check information such as the version and copyright of the printer driver.
Restores all the settings you have changed to their default values.
Clicking this button restores all the settings on the current screen to their default values (factory
Paper Detailed Settings dialog box
Wait time can be set to allow ink to dry. Between Pages settings are only enabled for roll paper.
The wait time until outputting paper can be set after printing one page. Time is taken before
cutting roll paper to allow the ink to dry, so even when Automatic Cutting in the Roll Paper
Options of the Page Setup tab is set to Yes, page may be dropped into the basket with dried
Color Settings dialog
Settings in printer unit control panel are applied.
Page will be output immediately after printing