Switching the Paper Source to Match the Purpose
This printer has three paper sources: Roll 1, Roll 2, and Cut Sheet.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1. Open the
printer driver setup window
2. Select the media type
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
3. Select the paper source
From the Paper Source list on the Page Setup tab, select the paper source that matches your purpose.
Roll Paper (Auto)
Feeds paper by automatically switching between Roll 1 and Roll 2 according to the print job.
Feeds paper from Roll 1.
Feeds paper from Roll 2.
Feeds paper using the cut paper.
• The paper feed method will differ according to the paper or lower level (roll paper 2) settings, or
roll unit option settings.
4. Complete the setup