Selecting Feed Amount Adjustment Method
There are two methods of adjusting the paper feed amount, Prioritize print quality and Prioritize length
accuracy, either of which will be applied during printing.
Since the method that is applied during printing is determined from the value of the Set priority setting,
configure Set priority to match the print target.
Follow the procedure below to perform settings.
1. Load paper.
Loading Rolls on the Roll Holder
Loading the Upper Roll on the Printer
Loading Sheets in the Printer
2. Flick HOME screen and tap
3. Tap Paper feed adjustment.
4. Tap Set priority.
5. Tap paper to adjust.
6. Tap setting.
Prioritize print quality
Adjusts the feed amount to reduce banding across the sheet in printed documents. Adjust print
quality settings are applied. When Paper feed fine adjustment is executed, the Paper feed fine
adjustment settings are applied in addition to the Adjust print quality settings.
Prioritize length accuracy
Adjusts the feed amount for better accuracy of lines in printed documents.
Prioritize print quality or Prioritize length accuracy is selected, depending on the setting as
selected in the printer driver at the time of printing.
7. Tap OK on displayed screen.