Paper Is Not Cut Straight - Canon imagePROGRAF PRO-2000 Online Manual

Paper is not cut straight

Check 1
Is the edge of the paper cutting position creased?
Straighten out any curling by the edges of the paper.
Check 2
Is the edge of the paper cutting position lifting up when cutting?
Reload the paper correctly.
Check 3
Is the paper a type that can be cut with the cutter blade?
Set Cutting mode in the touch screen menu to User cut, then and cut the roll paper with a cutting implement
such as scissors.
Specifying the Cutting Method for Rolls
Check 4
Check that the Cut speed setting is correct
Change the Cut speed setting in the touch screen menu.
Menu Structure
Check 5
Did the printing material slip diagonally while being cut?
Set the Cutting mode in the touch screen menu to Eject cut, and then hold and cut the material after it has
printed.
Specifying the Cutting Method for Rolls
Check 6
Is the cutter blade attached properly?
Attach the cutter blade properly.
Replacing the Cutter Blade
Check 7
Is the edge of the cutter blade blunt?
Replace the cutter blade.
713