Shows the source from which paper is supplied.
You may be able to switch the paper source with the printer driver.
Roll Paper (Auto)
Depending on the paper settings on the printer driver and the paper information registered to the
printer, the printer automatically determines which roll paper to use and then feeds that paper.
Paper is fed from Roll 1.
Paper is fed from Roll 2.
Feeds paper using the cut paper.
• Depending on the media type and size, the Paper Source settings that can be selected may differ.
Select the roll paper width.
Select the width that matches the width of the roll paper loaded in the printer.
Roll Paper Options
Roll Paper Options dialog
You can specify auto cut, banner printing, and other settings for printing on roll paper.
Output Method dialog
You can select Output Method and specify save settings for saving documents to a box.
Paper Size Options dialog
The Paper Size Options dialog box allows you to create and register any user-defined paper.
Custom Size Settings dialog box
This dialog box allows you to specify the size (width and height) of the custom paper.
Specifies the Width and the Height of the custom paper. Measurement is shown according to the
units specified in Units.
Select the unit for entering a user-defined paper size.
Borderless Setting dialog box
Use Amount of Extension to adjust how much of the document extends off the paper during borderless
Amount of Extension
Adjusts how much of the document extends off the paper during borderless printing.
Moving the slider to the right increases the amount of extension and allows you to perform borderless