Printing by Automatically Switching Upper-level and Lower-level
You can print by automatically switching Roll 1 and Roll 2 depending on the media type or your purpose.
The procedure for printing by switching the roll papers is as follows:
Load roll papers
2. Open the
printer driver setup window
3. Select the media type
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
4. Select the paper size
From the Page Size list on the Page Setup tab, select the same size as that of the document that was
created with the application software.
5. For Paper Source, select Roll Paper (Auto)
in upper and lower levels of printer